Roger Raglin NFUSED® Weapons Cleaner/Lubricant Set - 16oz & 2oz

• Water Based
• Contains corrosion inhibitors
• Prevents flash rusting of freshly-cleaned
  firearms
• Contains NO Ammonia
• Can be used indoors

RESULTS:

• No Solvent Smell
• Removes old oils/lubricants
• Friendly Cleaner

NFUSED® Weapons Lubricant

NFUSED® is a synthetic dry metal conditioner which molecularly bonds to heated gun metal making it self-lubricating under the toughest environmental conditions. Unlike traditional gun oils, NFUSED® protects the metal surface by a super tough regenerating hi density electro-chemical bonding process. NFUSED® is not a temporary coating. It seals and conditions the heated metal leaving a “dry” lubricated surface that reduces heat, improves performance and prevents jamming, and corrosion. Ease of cleaning is an added bonus!

BENEFITS OF NFUSED®

• Near dry and constant lubrication
• Minimal Material build-up
• Highly concentrated
• Permeates the metal surface
• Corrosion inhibitors
• Extreme temperature range

RESULTS:

• Prevents jamming
• Longer interval between cleanings
• Inhibits corrosion
• Ease of cleaning
• Improved performance
• Doesn’t gum up
• Performs in harsh environments

NFUSED® Instructions for Weapon Applications

MAKE SURE FIREARM IS FULLY UNLOADED

Weapons Cleaning:
Spray into bore or action to dissolve and remove fouling, oil, and grease.
Brush heavy deposits and reapply to rinse away fouling.
Wipe dry. After cleaning, use NFUSED® lubricant
for the ultimate lubrication and protection.

Weapons Lubrication:
Apply a very thin film (4-6 drops of NFUSED) to cotton lint-free cloth/patch to all clean metal surfaces of the firearm.
Let NFUSED® absorb into metal for 10 to 15 minutes. Heat quickens the process such as a hair dryer, heat gun, etc.
Let metal surfaces cool. Reapply and heat again.
After three initial applications, re-lubricate every 1-2 thousand rounds fired.
Wipe completely to avoid sand and dust contamination.