Roger Raglin NFUSED® Weapons Cleaner/Lubricant Bonus Pak - 4oz and 1oz

A highly effective gun cleaner safe for use around varnishes, wood gunstocks, camouflage finishes, polymer stocks and frames. Contains corrosion inhibitors to prevent flash rusting of freshly-cleaned firearms. Contains NO ammonia. After cleaning, use NFUSED® Lubricant for the ultimate lubrication and protection.

BENEFITS OF NFUSED®

  • Water Based
  • Contains corrosion inhibitors
  • Prevents flash rusting of freshly-cleaned 
    firearms
  • Contains NO Ammonia
  • Can be used indoors

RESULTS:

  • No Solvent Smell
  • Removes old oils/lubricants
  • Friendly Cleaner

NFUSED® Weapons Lubricant

NFUSED® is a synthetic dry metal conditioner which molecularly bonds to heated gun metal making it self-lubricating under the toughest environmental conditions. Unlike traditional gun oils, NFUSED® protects the metal surface by a super tough regenerating hi density electro-chemical bonding process. NFUSED® is not a temporary coating. It seals and conditions the heated metal leaving a “dry” lubricated surface that reduces heat, improves performance and prevents jamming, and corrosion. Ease of cleaning is an added bonus!

 

BENEFITS OF NFUSED®

  • Near dry and constant lubrication
  • Minimal Material build-up
  • Highly concentrated
  • Permeates the metal surface
  • Corrosion inhibitors
  • Extreme temperature range

RESULTS:                              

  • Prevents jamming
  • Longer interval between cleanings
  • Inhibits corrosion
  • Ease of cleaning
  • Improved performance
  • Doesn’t gum up
  • Performs in harsh environments

 NFUSED® Instructions for Weapon Applications

MAKE SURE FIREARM IS FULLY UNLOADED

Weapons Cleaning:  

Spray into bore or action to dissolve and remove fouling, oil, and grease.

Brush heavy deposits and reapply to rinse away fouling. 

Wipe dry. After cleaning, use NFUSED® lubricant 

for the ultimate lubrication and protection. 

Weapons Lubrication: 

Apply a very thin film (4-6 drops of NFUSED) to cotton lint-free cloth/patch to all clean metal surfaces of the firearm.  

Let NFUSED®  absorb into metal for 10 to 15 minutes. Heat quickens the process such as a hair dryer, heat gun, etc.  

Let metal surfaces cool. Reapply and heat again.  

After three initial applications, re-lubricate every 1-2 thousand rounds fired.  

Wipe completely to avoid sand and dust contamination.


Continue Shopping or View Cart

Collections: Gun Cleaner/Lubricant



Related Items